Vidikron vision70 User Manual
Vidikron Vision 70 Series Owner’s Operating Manual
65
PRE
L
IMINAR
Y
Colors in the image are
swapped; for example, reds
appear blue or vice versa.
swapped; for example, reds
appear blue or vice versa.
•
The Red/Pr, Green/Y or
Blue/Pb outputs from the
source are connected to the
wrong inputs on the Vision
70.
Blue/Pb outputs from the
source are connected to the
wrong inputs on the Vision
70.
•
Ensure that the source
outputs are connected to
the correct Vision 70 input.
outputs are connected to
the correct Vision 70 input.
TEMP and LAMP LEDs are both
flashing red.
flashing red.
•
The lamp cover is open.
•
Fans are not working
properly.
properly.
•
Close the lamp cover.
•
Please contact your
Vidikron dealer for
assistance.
Vidikron dealer for
assistance.
LAMP LED lights solid red.
•
The lamp has failed or
exceeded its usage life.
exceeded its usage life.
•
Replace the lamp with a
new one.
new one.
TEMP LED lights solid red.
•
Vision 70 internal
temperature is too high.
temperature is too high.
•
Power off the Vision 70 and
allow it to cool down.
Ensure that the intake and
exhaust vents are not
blocked. Turn the projector
back on. If the problem
persists, please contact
your Vidikron dealer for
assistance.
allow it to cool down.
Ensure that the intake and
exhaust vents are not
blocked. Turn the projector
back on. If the problem
persists, please contact
your Vidikron dealer for
assistance.
Table 5-1. Troubleshooting Chart (continued)
Symptom
Possible Cause(s)
Solution