Vidikron Vision 10 User Manual
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
17
PRE
L
IMINAR
Y
Throw Distance
Throw distance is the distance measured from the front of the projector to the screen. This is
an important calculation in any projector installation as it determines whether or not you
have enough room to install your projector with a desired screen size and if your image will
be the right size for your screen.
an important calculation in any projector installation as it determines whether or not you
have enough room to install your projector with a desired screen size and if your image will
be the right size for your screen.
You can quickly estimate the throw distance by taking the width of the screen and
multiplying it by the lens throw ratio; see Figure 3-2.
multiplying it by the lens throw ratio; see Figure 3-2.
• The Vision 10 has a lens throw ratio of between 1.40 and 1.60.
• The Vision 12 has a lens throw ratio of between 1.42 and 1.65.
The result of this calculation tells you roughly how far back the projector should be
positioned from the screen in order to project a focused image large enough to fill the
screen.
positioned from the screen in order to project a focused image large enough to fill the
screen.
For example, with an 8-foot (96-inch) wide screen:
• The Vision 10 has a throw distance range of between 134.4 inches (3.41 meters) and 153.6
inches (3.90 meters).
• The Vision 12 has a throw distance range of between 136.3 inches (3.46 meters) and 158.4
inches (4.02 meters).
Figure 3-2. Estimating Throw Distance
Estimating Throw Distance (TD)
Vision Model 10
Minimum TD = Screen Width x 1.40
Maximum TD = Screen Width x 1.60
Minimum TD = Screen Width x 1.40
Maximum TD = Screen Width x 1.60
Vision Model 12
Minimum TD = Screen Width x 1.42
Maximum TD = Screen Width x 1.65
Minimum TD = Screen Width x 1.42
Maximum TD = Screen Width x 1.65