Vidikron Vision 65 User Manual

To install the fixed CineWide base plate on a Vision 65/CineWide or Vision 75/CineWide with 
a prismatic anamorphic lens:

1.

Place the projector upside down on a blanket or other soft surface. 

2.

Line up the two mounting holes on the CineWide base plate with those on the bottom of 
the projector.

3.

If you are mounting the projector on a ceiling: Line up the four holes on the projector 
ceiling mounting plate (included with the projector ceiling mount kit) with those on the 
bottom of the projector. 

4.

Secure the CineWide base plate (and ceiling mounting plate, if needed) to the projector 
with the four, M6x12mm screws and washers provided with the CineWide lens base 
plate. See Figure 3-8. 

 

Washers under
Ceiling Mount Plate
(2 places)