Vidikron Vision 12 User Manual
8
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
PRE
L
IMINAR
Y
1.
COMPOSITE VIDEO INPUT
Standard composite video input for connecting a VCR, camcorder, laser disc player or
other composite video source.
other composite video source.
2.
S-VIDEO
Standard S-Video input for connecting a DVD player, satellite receiver or Super VHS
(S-VHS) VCR.
(S-VHS) VCR.
3.
COMPONENT VIDEO (RCA connectors)
Standard-definition (480i/576i) or high-definition (720p/1080i), YPrPb component input.
This is the input for component video from sources such as DVD players.
This is the input for component video from sources such as DVD players.
4.
RGB HD
A 15-pin VGA connection to a personal computer or HD tuner with an RGB output. The
Vision 10/12 automatically detects the signal resolution: 480p, 576i, 720p or 1080i.
Vision 10/12 automatically detects the signal resolution: 480p, 576i, 720p or 1080i.
5.
HDMI / Computer Input (Digital)
HDCP-compliant digital video input for connecting a DVD player, personal computer or
HD tuner with a DVI or HDMI output.
HD tuner with a DVI or HDMI output.
6.
POWER INPUT (100 to 240 VAC)
Connect the Vision 10/12 to power here.
7.
RS-232 CONTROL PORT
A female, 9-pin D-sub connector for interfacing with a PC or home theater
automation/control system.
automation/control system.
8.
12-VOLT TRIGGER (3.5-mm mini phono jack; Tip = +12V; Sleeve = Ground)
For connecting to retractable screens or other devices that respond to 12-volt triggers.
Outputs +12 volts / 250 milliamps when the projector is turned on.
Outputs +12 volts / 250 milliamps when the projector is turned on.
9.
LAMP COVER
10. EXHAUST VENT
For best results, do not run your DVD player in progressive mode.
Tip