Vidikron Vision 120 User Manual

1.

Input an anamorphic cross-hatch test pattern to the projector.

2.

Unscrew the Anamorphic Lens just enough to allow it to rotate freely.

3.

Grasp the lens by the center ring and rotate the lens until the image is properly 
anamorphic: 

4.

When the image geometry appears correct, tighten the Anamorphic 
Lens Set Screw (item #10) to secure the lens in place. (When viewed 
from the front, the rear opening on the anamorphic lens should 
appear as a tall, narrow oval.) 

 

Focus: Finally, rotate the Focus Ring on the anamorphic lens 
to fine-tune the optical focus. 

Wrong Position

Correct Position

F

O

C

U

S