Vidikron Vision 50 User Manual
10
Vidikron Vision 50 Series Owner’s Operating Manual
PRE
L
IMINAR
Y
1.
ON / OFF
Use these buttons to turn the projector on or off.
2.
Source Selection Buttons:
COMP 1 (SD Component)
Press to select Component 1 (SD 480i/576i) video input as the source.
S-VID (S-Video)
Press to select the S-Video input as the source.
VIDEO
Press to select Composite video input as the source.
COMP 2 (HD Component)
Press to select Component 2 (HD 480p/576p/720p/1080i) video input as the source.
RGB HD
Press to select the Component 2 RGB input.
HDMI
Press to select the HDMI input.
3.
Aspect Ratio Selection Buttons
Use these buttons to select an aspect ratio directly, as follows:
ANA (Anamorphic)
For viewing 16:9 DVDs or HDTV programs in their native aspect ratio.
4X3 (Standard 4:3)
Scales the input signal to fit 4:3 display mode in the center of the screen.
L-BOX (Letterbox)
For viewing LaserDisc movies or non-anamorphic DVDs on a 16:9 screen.
I-WIDE (IntelliWide)
Enlarges a 4:3 image horizontally in a NON-linear fashion to fit 16:9 full screen display.
CINEMA
For viewing 2.35:1 source material.
C-FILL (CineWide-equipped projectors only)
Selects the Cinema Fill aspect ratio, used for viewing 16:9 source material on a 2.35:1
screen.
screen.