Vidikron Vision 50 User Manual

The lamp should be replaced when it reaches the end of its life (typically 2000 hours), or 
sooner if a noticeable degradation in brightness occurs. Contact your Vidikron dealer to 
obtain a replacement lamp.

1.

Turn off the projector and unplug the power cord. 
Allow the projector to cool down for 
approximately 45 minutes prior to removing the 
lamp assembly for replacement.

2.

Remove the three screws from the lamp cover.

 

 

3.

Remove the lamp cover. 

 

 

 

 

 

 

 

4.

Remove the two lamp assembly mounting screws.

 

 

 

 

 

 

 

 

5.

Grasp the lamp assembly handle and pull gently, 
removing the lamp module from the projector 
housing.

6.

Install the new lamp module and replace the two 
screws. 

 

 

7.

Replace the lamp cover at the top first and secure it 
with the three screws.

8.

Turn on the power and select Lamp Reset Timer from 
the Service menu to reset the lamp timer (refer to 
Lamp Reset Timer on page 58). 

5