Leica CM3050 S User Manual
20
Instruction Manual V1.2 - 11/2006
3.4.3 The footswitch
Function
The footswitch performs the same task as the
RUN/STOP and RUN/ENABLE keys (activating/
deactivating motorized sectioning / trimming).
In addition, the footswitch can be used to acti-
vate the emergency stop function.
RUN/STOP and RUN/ENABLE keys (activating/
deactivating motorized sectioning / trimming).
In addition, the footswitch can be used to acti-
vate the emergency stop function.
Models with footswitch:
All instruments with sectioning motor.
Important note:
In all instrument models that are
delivered with footswitch, the
footswitch must be installed! -
Otherwise the instruments are not
functional.
In all instrument models that are
delivered with footswitch, the
footswitch must be installed! -
Otherwise the instruments are not
functional.
3.5
Prior to switching on the instrument
After transport, observe a waiting
period of at least 4 hours before
turning the instrument on! - See also
safety instructions in chapter 2.3.1
‘Transport’.
period of at least 4 hours before
turning the instrument on! - See also
safety instructions in chapter 2.3.1
‘Transport’.
Have you observed all safety
instructions in chapters 2.3.2 ‘Site
requirements’ and 2.3.3 ‘Electrical
connections’?
If not:
--> Please read chapters 2.3.2 and
2.3.3!
instructions in chapters 2.3.2 ‘Site
requirements’ and 2.3.3 ‘Electrical
connections’?
If not:
--> Please read chapters 2.3.2 and
2.3.3!
•
Insert mains plug into wall outlet.
•
Continue with chapter 5.1 ‘Setting up the in-
strument’.
strument’.
3.
Installation
Connecting the footswitch
•
Insert footswitch into port (1) and secure.
1