Vidikron Vision 100t User Manual
Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual
17
Vertical and Horizontal
Position
Proper placement of the projector relative to the screen will yield a rectangular,
perfectly-centered image that completely fills the screen.
perfectly-centered image that completely fills the screen.
Ideally, the projector should be positioned perpendicular to the screen and in such a way
that the lens center and screen center are aligned with each other, as shown in Figure 3-2.
that the lens center and screen center are aligned with each other, as shown in Figure 3-2.
Figure 3-2. Projector Placement
Additional Lens Options for the Vision Model 100t Only
5
0.64 (Fixed)
For rear-screen installa-
tions only. Contact
Vidikron Technical Sup-
port for more information.
Not Applicable (Note 2)
6
1.22 - 1.44
117.12
138.24
Table 3-3. Vision 90t/100t Lens Options and Throw Ratios (continued)
Lens Option
(Note 2)
Throw Ratio
with Primary
Lens Only
Throw Range in inches,
with 96x54-inch (1.78:1)
Screen
Throw Ratio
with Primary
Lens and
Anamorphic
Lens
Throw Range in inches,
with 126.9x54-inch
(2.35:1) Screen
Minimum
Maximum
Minimum
Maximum
Notes:
1. Throw distance does not affect image quality, provided these ranges are taken into account.
2. Only lens options 2, 3 and 4 can be used with the optional CineWide (secondary anamorphic) lens. Doing
so affects the throw distances as shown here.
Height
Projection Distance
Ceiling
Ceiling Installation
Screen
Height
Floor
Lens Center
Projection Distance
Floor Installation
Lens Center
x
Lens Center
x
Screen
Lens Center