Sony KP-ES53 User Manual

46

Additional Information

If you have any problem while viewing your TV, please check the following
troubleshooting guide. If the problem persists, contact your Sony dealer.

• The connection is

loose or the cable is
damaged.

• Channel presetting

is inappropriate or
incomplete.

• The antenna type is

inappropriate.

• The antenna

direction needs
adjustment.

• Signal transmission

is low.

• Broadcast signals

are too strong.

• The TV system

setting is
inappropriate.

• The power cord,

antenna or VCR is
not connected.

• The projection TV is

not turned on.

5

44

–

–

–

45

–

43

44

5

13

14

• Check the antenna cable and

connection on the projection TV, VCR
and at the wall.

• Press the PRESET button to display

the “MANUAL PROGRAM” menu
and preset the channel again.

• Check the antenna type (VHF/UHF).

Contact a Sony dealer for advice.

• Adjust the antenna direction. Contact

a Sony dealer for advice.

• Try using a booster.

• Press the PRESET button to display

the “MANUAL PROGRAM” menu.
Then, select “

 SENS: LOW”.

• Turn off or disconnect the booster if it

is in use.

• If the sound of all the channels are noisy,

display the “CH PRESET” menu and
select “AUTO PROGRAM” to preset the
channels again.

• If the sound of some channels is noisy,

select the channel, then display the
“CH PRESET” menu and select the
appropriate TV system (“TV SYS”).

• Check the power cord, antenna and

the VCR connections.

• Press 

I

/1 on the remote.

• Press ! on the TV to turn off the

projection TV for about five seconds,
then turn it on again.