Panasonic PT-50LC14 User Manual

By inputting a High-bandwidth Digital Content Protection high-definition picture source to the HDMI IN terminal of 
this Device Display, high-definition pictures can be displayed on the screen in their digital form. (This terminal is for 
use in the future when High-bandwidth Digital Content Protection DVD players and D-VHS are put on the market.)

•   Select the HDMI input position by pressing the TV/VIDEO button. (P. 35)
•   The HDMI IN terminal can only be used with 1080i, 720p and 480p picture signals.
•   If there is no audio, check if the source equipment has PCM output. If not, please use analog connections.
•   Be sure HDMI is securely connected. If not, picture noise and/or incorrect picture display may result.

Video Signal:
The Device display is compatible with following formats. Please set the connecting device to following format.

Display mode

No. of dots

Vertical scanning frequency (Hz)

1080i

1920 x 1080i

59.94 / 60

720p

1280 x 720p

59.94 / 60

480p

720 x 480p
640 x 480p

59.94 / 60
59.94 / 60

•   If you cannot display the picture because your Digital Set Top Box does not have a Digital Out terminal 

setting, use the Component Video Input (or the S-Video Input or Video Input). In this case, the picture will be 
displayed as an analog signal.

Press TV/VIDEO on the Remote Control to select HDMI input. 

Connect the HDMI output from the set top box or a DVD player to the HDMI input on the back of the unit.

Please see “AUDIO SELECT” on page 43.