Panasonic PT-AE8000U User Manual
Projecting an image
ENGLISH
- 31
Basic Operation
Projecting an image
Check the connections of the external devices
(
page 26) and the connection of the power cord
(
page 28), and switch on the power (
page 29), to
start projecting. Select the video for projection, and
adjust appearance of the projected image.
Selecting the input signal
1) Switch on the external devices.
z
Press the play button on an external device, such
as a Blu-ray player. When [AUTO SEARCH] in the
[OPTION] menu is [ON], the projector automatically
searches for an input signal and starts projection.
(
page 78)
2) Switch the video input.
z
The video selected with the <INPUT SELECT>
button is projected. (
page 34)
Attention
z
The video may not be displayed properly depending on
the external device, or the blu-ray disc or DVD disc, to
be played back. In such cases, set [TV-SYSTEM], [RGB/
YC
B
C
R
] or [RGB/YP
B
P
R
] of the [ADVANCED MENU].
(
page 57, 58)
z
Check the projection screen and video aspect ratio, and
select the most appropriate aspect ratio with [ASPECT]
in the [POSITION] menu. (
page 61)
Adjusting the image
1) Adjust the angle of the projector.
z
Place the projector parallel to the screen, and
then install it on a flat surface so that the screen
becomes rectangle.
z
If the screen is tilted lower than the screen, extend
the adjustable feet to make a rectangle screen.
z
For details, see “Front adjustable feet and throwing
angle”. (
page 23)
2) Remove the lens shift cover.
z
For details, see “Opening the lens shift cover”.
(
page 19)
3) Rotate the lens shift lever in a
counterclockwise direction to disengage
the shift lever lock.
4) Adjust the lens shift.
z
Adjust the projection position with the shift lever.
z
See “Lens shift and positioning”. (
page 24)
5) Rotate the shift lever clockwise to fix.
6) Attach the lens shift cover.
7) Managing the lens control settings
6) Attach the lens shift cover.
7) Managing the lens control settings
z
Press +/− of the <FOCUS> and <ZOOM> buttons
on the device controls to adjust.
Press the <FOCUS> buttons (+/-) to change the
projection size, and press the <ZOOM> buttons
(+/-) again to fine tune the projection size.
<FOCUS> button
<ZOOM> button
Note
z
It is recommended that you display the [ZOOM/FOCUS]
test pattern from the [LENS CONTROL] menu to
accurately adjust the focus (
page 73).This can also be
performed with the remote control. (
page 32)
z
Panasonic recommends that focus adjustment be made
after 30 minutes or more have elapsed since picture
display.