Panasonic PT-AE8000U User Manual

Page of 110
[3D SETTINGS] menu
66 - ENGLISH
Settings
[LEFT/RIGHT SWAP]
Switch to [SWAPPED] if you feel discomfort when 
watching a 3D video with 3D Eyewear.
Switch settings
Switch settings
[NORMAL]
[SWAPPED]
[NORMAL]
If the 3D video is being displayed 
correctly while the 3D Eyewear is 
being worn, do not change from 
[NORMAL] settings.
[SWAPPED]
Select this if a feeling of discomfort is 
felt towards the 3D video while wearing 
3D Eyewear.
Note
 
z
If 3D video is being correctly displayed in 3D, setting 
[LEFT/RIGHT SWAP] to [SWAPPED] may lead to a 
dramatic feeling of discomfort. Confirm display of 3D 
video and use correctly.
 
z
When the power supply for the projector is turned off and 
on or the input channel is changed, the [LEFT/RIGHT 
SWAP] changes to [NORMAL].
[3D PICTURE BALANCE]
With regards to the left eye and right eye video of the 
3D video, the difference in the video signal for the 
right eye can be adjusted based on that for the left 
eye.
Press the <ENTER> button.
 
z
[3D PICTURE BALANCE] menu is displayed.
 3D PICTURE BALANCE
 CONTRAST
 CONTRAST R
 CONTRAST G
 CONTRAST B
 BRIGHTNESS
 BRIGHTNESS R
 BRIGHTNESS G
 BRIGHTNESS B
 COLOR
 TINT
 3D WAVEFORM MONITOR
 PICTURE BALANCE MEMORY
0
0
0
0
0
0
0
0
0
0
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION
 
■ Adjustment method
1)   Press the ▲▼ buttons and select the 
item for adjusting the right eye video.
 
z
The video for the left eye and for the right eye are 
shown on the left and the right. 
The items that can be adjusted are contrast, 
brightness, color, and tint.
2)   Use the ◄ ► buttons to change the 
value.
 
z
For details about contrast, brightness, color,  
and tint, see [CONTRAST] (
 page 40), 
[BRIGHTNESS] (
 page 40), [COLOR]
(
 page 40), and [TINT] (
 page 40)
Change the value
Change the value
LEFT
RIGHT
Current display for left 
eye video
(Fixed)
Current display for right 
eye video
(Can be adjusted)
Note
 
z
This is a function to balance 3D video, so do not 
intentionally use settings that will upset the balance. 
Please take care not to make the balance extremely 
uneven as this may lead to a feeling of discomfort.
 
z
This adjustment function is only active for 3D input 
signals and is inactive for 3D video that has been 
converted from 2D to 3D.
 
z
In the case that the settings for the left eye video are 
at minimum, the settings for the right eye cannot be set 
below them. 
In the case that the settings for the left eye video are at 
maximum, the settings for the right eye cannot be set 
above them.
 
z
Even if the [LEFT/RIGHT SWAP] setting is used, 
adjustment can only be performed on the right eye input 
signal.
 
z
When adjusting the 3D picture balance, keystone 
correction is temporarily disabled and menus other than 
the [3D PICTURE BALANCE] menu cannot be used.