Panasonic PT-AE8000U User Manual

72 - ENGLISH

The gauge display of the one-dimensional display on 

the parallax adjustment monitor of [Mode2] or [Mode3] 

indicates the following content:

Blue gauge Displays the maximum value of the into 

screen parallax

Red gauge Displays the maximum value of the in 

front of screen parallax

Displays the peak of the parallax of the 

entire image during the last one second 

(left side: In front of screen parallax, right 

side: Into screen parallax)

ADJUST

ENTER : APPLY

DEFAULT : RESET

FUNCTION : FREEZE

MOVE DISPLAY

Peak of the in 

front of screen 

parallax

Peak of the 

into screen 

parallax

This indicates the maximum estimate  

in front of screen parallax while measuring.

This indicates the maximum estimate  

into screen parallax while measuring.

Reference 

line

*  The illustration shown here depicts how an image is 

projected. 

The parallax distribution display on the parallax adjustment 

monitor in [Mode3] indicates the following content:

Blue display Displays the into screen parallax

Red display Displays the in front of screen parallax

ADJUST

ENTER : APPLY

DEFAULT : RESET

FUNCTION : FREEZE

MOVE DISPLAY       SUB MENU : CHANGE SENSITIVITY 

HIGH SENSITIVITY

*  The illustration shown here depicts how an image is projected. 

 

z

In [Mode2] and [Mode3], the display position can be 

moved left and right with the ◄ ► buttons.

 

z

In [Mode3], the detection level of the parallax can be 

changed with the <SUB MENU> button. Low level and 

high level can be switched by pressing the button each 

time. The default setting is high level.

 

z

In the cases such as 3D video input has a very large parallax 

or in dark scenes, the correct parallax may not be detected.

 

z

If the depth of field effects in front of and into the screen 

for the 3D video parallax are set stronger than the 

target, this may cause some individuals to feel extreme 

discomfort or fatigue. Adjust the parallax so as to not 

exceed target displaying (white (solid line)).

 

z

When an action is performed such as switching the 

power off and on, switching input, or switching the signal, 

the parallax adjustment set becomes inactive.

 

z

When adjusting the parallax using the [3D VIEWING 

MONITOR], the ends on both sides of the video are 

masked. Also note that the aspect size is changed.

ADJUST

ENTER : APPLY

DEFAULT : RESET

FUNCTION : CANCEL FREEZE

*  The illustration shown here depicts how an image is 

projected. 

 

z

The [3D VIEWING MONITOR] is disabled during 

keystone correction.

During the display of 3D images, a smooth operation 

in which the continuity of parallax is maintained is 

realized.

Active

Inactive

 

z

This function is only active for 3D input signals and is 

inactive for 3D video that has been converted from 2D to 3D.

 

z

When [FRAME CREATION] is [OFF], [3D MOTION 

REMASTER] cannot be performed.

A request message regarding 3D viewing is displayed.