Panasonic PT-AE8000U User Manual

78 - ENGLISH

You can switch the Panasonic logo that is displayed 

when starting up the projector on/off. 

Active

Inactive

 

z

The logo Panasonic is displayed for 15 seconds.

Sets whether to automatically search for terminals 

that have an input signal when the projector is turned 

on. 

Active

Inactive

 

z

Set this to [ON] under normal circumstances.

 

z

When no signal is detected, the last used input will be 

selected.

If video is not displayed correctly when this projector 

is connected to an external device via an HDMI 

connection, switch the settings.

Signal level used by general 

external devices

Expanded signal level used by 

some devices

 

z

This may not work correctly with some external devices, 

and problems such as video not being displayed may 

occur.

Switch this setting when a progressive signal is 

input and you wish to reduce the time taken from the 

signal being input to the video being displayed on the 

screen.

Prioritizes the image quality

Prioritizes the frame response

 

z

[NORMAL] allows higher quality image viewing.

Set the projection method according to the projector 

installation status.  Change the projection method if 

the screen is displayed upside down or the display is 

reversed. (



 

page 21)

[FRONT/DESK] When setting on a desk/floor and 

projecting from the front

When using the ceiling mount 

bracket (optional accessory) and 

projecting from the front

When setting on a desk/floor and 

projecting from the rear (using a 

translucent screen)

When using the ceiling mount 

bracket (optional accessory) and 

projecting from the rear (using a 

translucent screen)