Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. PT-AE8000U
  5. User Manual

Panasonic PT-AE8000U User Manual

Download
Page of 110
[OPTION] menu
ENGLISH
 - 79
Settings
[TRIGGER 1/2 SETTING]
You can set the function for each trigger terminal.
The trigger terminals for this projector are used as 
both the input/output terminal for the trigger function 
and the output terminal for the external 3D IR 
Transmitter (optional accessory). This is selected with 
a menu.
Attention
 
z
You can connect a maximum of two external 3D IR 
Transmitter (optional accessory).
 
z
Make sure the <MAIN POWER> switch of the projector 
is turned <OFF> before a cable is connected to or 
disconnected from a trigger terminal.
 
■ [OUTPUT]
In conjunction with projector operation set in the [TRIGGER 
1 SETTING]/[TRIGGER 2 SETTING] menu, a trigger 
output signal is sent to an external device with a trigger 
terminal to enable control.
 
■ [INPUT]
Receipt of a trigger input signal from an external device 
enables control of projector operation setup in the 
[TRIGGER 1 SETTING]/[TRIGGER 2 SETTING] menu.
ON-SCREEN DISPLAY
BACK COLOR
STARTUP LOGO
AUTO SEARCH
HDMI SIGNAL LEVEL
FRAME RESPONSE
PROJECTION METHOD
TRIGGER 1 SETTING
TRIGGER 2 SETTING
SLEEP
HIGH ALTITUDE MODE
LAMP POWER
FUNCTION BUTTON
VIERA LINK SETTINGS
 BLUE
 ON
 ON
 NORMAL
 NORMAL
 FRONT/DESK
 OFF
 OFF
 OFF
 OFF
 NORMAL
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION
1/2
1)   Use the ▲▼ buttons to select [TRIGGER 
1 SETTING] or [TRIGGER 2 SETTING] and 
press the <ENTER> button.
 
z
The [TRIGGER SETTING] menu is displayed.
TRIGGER 1 SETTING
     OFF
OUTPUT
     POWER ON
     SELECT LENS MEMORY 1
     SELECT LENS MEMORY 2
     SELECT LENS MEMORY 3
     SELECT LENS MEMORY 4
     SELECT LENS MEMORY 5
     SELECT LENS MEMORY 6
     BLANK
DELAY TIME
INPUT
     POWER ON/OFF
   3D SHUTTER OUT
     SELECT 4:3 ASPECT
     SELECT 16:9 ASPECT
     SELECT S16:9 ASPECT
     SELECT JUST ASPECT
     SELECT ZOOM ASPECT
     SELECT H-FIT ASPECT
     SELECT V-FIT ASPECT
     RS-232C COMMAND LINK
 0 SEC.
     BLANK
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION
2)   Press the ▲▼◄► buttons to select 
the input/output function and press the 
<ENTER> button.
 
z
Function settings
[OFF]
Unable to transmit the 
trigger output signal. Does 
not function even if trigger 
input signal is received. 
(Trigger input signal can 
be received.)
An external 3D IR 
Transmitter (optional 
accessory) will not 
operate even if 
connected.
[3D SHUTTER 
OUT]
Select this for connecting 
and use of an external 3D 
IR Transmitter (optional 
accessory).
Note
 
z
Read the operating instructions for the external 3D IR 
Transmitter (optional accessory) when using a 3D IR 
Transmitter.
 
z
Output
[POWER ON]
[SELECT 4:3 
ASPECT]
[SELECT LENS 
MEMORY 1]
[SELECT 16:9 
ASPECT]
[SELECT LENS 
MEMORY 2]
[SELECT S16:9 
ASPECT]
[SELECT LENS 
MEMORY 3]
[SELECT JUST 
ASPECT]
[SELECT LENS 
MEMORY 4]
[SELECT ZOOM 
ASPECT]
[SELECT LENS 
MEMORY 5]
[SELECT H-FIT 
ASPECT]
[SELECT LENS 
MEMORY 6]
[SELECT V-FIT 
ASPECT]
[BLANK]
[RS-232C COMMAND 
LINK]
When the item which is set in the [TRIGGER 
1 SETTING]/[TRIGGER 2 SETTING] menu is 
chosen or executed in the projector, 12 V is output 
from a trigger terminal.
Note
 
z
When [AUTO] is selected in the [ASPECT] menu of 
[POSITION], video is automatically displayed using either 
4:3 or 16:9 aspect ratio depending on the input signal, 
so if this aspect ratio matches the settings made in 
[TRIGGER 1 SETTINGS] or [TRIGGER 2 SETTINGS]  
12 V is output.