Sony KP-FX43 User Manual

49

Additional Information

• Check the antenna cable and

connection on the projection TV, VCR
and on the wall.

• Display the “CH PRESET” menu

under the “SETUP” menu and select
“MANUAL PROGRAM” to preset
the channel again.

• Check the antenna type (VHF/UHF).

Contact a Sony dealer for advice.

• Adjust the antenna direction. Contact

a Sony dealer for advice.

• Try using a booster.

• Display the “CH PRESET” menu

under the “SETUP” menu and select
“MANUAL PROGRAM”.
Then, select “

 SENS: LOW”.

• Turn off or disconnect the booster if it

is in use.

• If the sound of all the channels are noisy,

display the “CH PRESET” menu under
the “SETUP”menu and select “AUTO
PROGRAM” to preset the channels again.

• If the sound of some channels is noisy,

select the channel, then display the
“CH PRESET” menu under the
“SETUP”menu and select the appropriate
TV system (“TV SYS”).

• Press 

 or 

 .

If you have any problem while viewing your projection TV, please check the following
troubleshooting guide. If the problem persists, contact your Sony dealer.

6

45

–

–

–

46

–

43

45

21

• The connection is

loose or the cable is
damaged.

• Channel presetting

is inappropriate or
incomplete.

• The antenna type is

inappropriate.

• The antenna

direction needs
adjustment.

• Signal transmission

is low.

• Broadcast signals

are too strong.

• The TV system

setting is
inappropriate.

• The sound of the right

picture is selected
when TWIN pictures
are displayed.