Sony Qualia 006 User Manual

SXRD

2-584-141-12(1)

For best results, use this connection if:
❑

Your cable company scrambles all channels, which requires you to use a 
cable box.

❑

You do not have a VCR. (If you have a VCR, see pages 41 and 42.)

With this connection you can:
❑

Use the SXRD projection TV’s remote control to change channels 
coming through the cable box to the SXRD projection TV’s VHF/UHF 
jack. (You must first program the remote control for your specific cable 
box.) 

Connect the CATV cable to the cable box’s input jack.

Use a coaxial cable to connect the cable box’s output jack to the SXRD 
projection TV’s VHF/UHF jack.

Run Auto Program, as described in “Setting Up the SXRD Projection 
TV Channel List” on page 60.

✍

With this connection, all channels come into the SXRD projection TV 
through your cable box and only one unscrambled signal is sent to the 
SXRD projection TV, so you cannot use the dual picture features. If 
some of your channels are scrambled, but others are not, consider using 
the “Cable Box and Antenna” connection on page 37 instead.

VHF/UHF

Use the cable box

Tune the SXRD projection TV to the channel the cable box is set to 
(usually channel 3 or 4) and then use the cable box to switch 
channels.

Set up the SXRD projection TV remote control 
to operate the cable box

Program the remote control. See “Programming the Remote 
Control” on page 64.

Activate the remote control to operate the cable 
box

Press 

FUNCTION

 repeatedly until the 

SAT/CABLE

 indicator 

lights up.

Prevent the accidental switching of TV channels When using the cable box, the SXRD projection TV must stay on the 

channel the cable box is set to (usually channel 3 or 4). You can use 
the SXRD projection TV’s Channel Fix feature to lock in a specific 
channel. For details, see “Using the Channel Menu” on page 116.