Sony Qualia 006 User Manual

SXRD

2-584-141-12(1)

The remote control is preset to operate Sony brand video equipment.

If you have video equipment other than Sony brand that you want to control 
with the SXRD projection TV’s remote control, use the following procedure 
to program the remote control.

Turn to the list of “Manufacturer’s Codes” on page 65, and find the 
three-digit code number for the manufacturer of your equipment. (If 
more than one code number is listed, use the number listed first.)

Press 

FUNCTION

 repeatedly until the DVD/VCR, SAT/CABLE or 

i.LINK indicator lights up.

Press 

SAT/CABLE

 for five seconds until the indicator of the selected 

input flashes.

While the desired indicator is flashing, enter the three-digit 
manufacturer’s code number.

Press 

ENTER

.

To check if the code number works, aim the SXRD projection TV’s 
remote control at the equipment and press 

SAT/CABLE

 that 

corresponds with that equipment. If it responds, you are done. If not, try 
using another code listed for that manufacturer.

DVD/VCR

Sony DVD player

751

SAT/CABLE

Sony Satellite Receiver

801

i.LINK

Sony DVD player (i.LINK)

901

✍

The equipment must have infrared (IR) remote capability in order to be 
used with the remote control.

✍

You must do step 5 within 10 seconds of step 4, or you must redo 
steps 4 through 5.

✍

If more than one code number is listed, try entering them one by one 
until you come to the correct code for your equipment.

✍

If you enter a new code number, the code number you previously entered 
at that setting is erased.

✍

In some cases, you may not be able to operate your equipment with the 
supplied remote control. In such cases, use the equipment’s own remote 
control unit.

✍

Whenever you remove the batteries to replace them, the code numbers 
may revert to the factory setting and must be reset.