Panasonic PT-LB51SU User Manual

If a problem should occur with the projector, the TEMP, LAMP indicators will inform you. Manage the indicated 
problems as follow.

1. Confirm the status of all indicators and projector, and switch off the projector in proper way.
2. Find out the cause of the problem by status of the TEMP, LAMP indicators.
3. Follow the instruction for each indication below and solve the problem.
4. Turn on the projector in the correct way and confirm the indicator is not indicating a problem any longer.

J LAMP indicator

J TEMP indicator

• If no problem is found or the problem remains, do not turn on the projector. Instead contact an Authorised Service Center.

 

Illuminating RED

 

Flashing RED

 has 

reached 1 800 hours.

 circuit failure, abnormal function or Lamp unit is damaged.

 will run out 

soon and needs to be 
replaced.

The POWER is 
switched on again 
before the Lamp unit 
is cooled enough.

 circuit failure, 

abnormal function.

 is 

damaged.

Let the Lamp unit cool 
down and turn on the 
POWER

.

Contact an Authorised 
Service Center.

 

Illuminating RED and still projecting

 

Flashing RED and POWER is turned off

The temperature inside and/or outside the projector is abnormally high.

The ventilation openings are 
covered.

The room temperature is too 
high.

The projector is located at high 
elevations (above 1 400 m).

Remove the object(s) from the 
ventilation openings or clear 
around the projector.

Reinstall the t a temperature 
controlled place. 
See “Specifications” on 
page 48.

Turn on the projector

*1

 and set 

the HIGHLAND to ON.
See “HIGHLAND” on page 36.

*1. The projector will perform only 2 minutes with OFF setting at high elevation.

 indicator

 indicator