Panasonic PT-LB51NTE User Manual

 

Read and follow the operating and connecting instructions of each peripheral device.

 

The peripheral devices must be turned off.

 

Use cables that match each peripheral device to be connected.

 

If the input signal is affected by signal jitter, the projected image may have poor image quality and timebase 
correction is effective.

 

Confirm the type of video signals. See “List of compatible signals” on page 46.

 

Only one audio system circuit is available for each of the COMPUTER AUDIO IN and AUDIO IN L-R 
connectors, so if you change the audio input source, you will need to remove and insert the appropriate 
plugs.

 

If the signal cables are disconnected or if the power supply for the computer or video deck is turned off while 
“DIGITAL ZOOM” or “INDEX-WINDOW” is being used, these functions will be cancelled. 
See “Enlarging the centred area” on page 28.
See “Projecting an image in INDEX-WINDOW mode” on page 27.

• When COMPUTER2 SELECT in the OPTION menu is set to OUTPUT, do not connect any input signals.
• Refer to the accessory CD-ROM for details on the wireless network that can be used for controlling the projector with a 

personal computer. (PT-LB51NTE only)

Computers

DIN 8-pin
(male)

Computer for 
controlling

RGB signal cable 
(Commercial)

RGB signal cable 
(Commercial)

Computers

Serial adapter
(ET-ADSER :
sold separately)

Monitor

Audio system