Panasonic PT-LB51NTE User Manual

You can switch the input method manually by 
pressing the COMPUTER, WIRELESS (PT-
LB51NTE only) and VIDEO buttons. Press 
the required button several times or I H to 
cycle through the input methods as follows. 
The actual projected image will be changed 
in a while.

J Pressing the COMPUTER button

J Pressing the WIRELESS button

 

The WIRELESS

 button is only for PT-LB51NTE.

 

See CD-ROM contents for more detailed information.

J Pressing the VIDEO button

J Pressing the INPUT SELECT 

  WIRELESS

 is only for PT-LB51NTE.

When projecting an image, press FREEZE to 
capture the projected image and display it on 
the screen as a still picture. Press again to 
escape. While the image is frozen, the sound 
will be stopped.

The “SHUTTER” function can be used to 
momentarily turn off the picture and sound 
from the projector when the projector is not 
being used for short periods of time, such as 
during breaks in meetings or when carrying out 
preparation. The projector uses less power in 
“SHUTTER” mode than it does in normal 
projection mode. 

• Only when the COMPUTER2 SELECT is set to INPUT, 

you can switch between COMPUTER1 and 
COMPUTER2

.

• See “List of compatible signals” on page 46.
• See “Connections” on page 18.

• Press the FREEZE button to return to the projection.
• When FUNCTION BUTTON is set to "FREEZE" (see 

“FUNCTION BUTTON” on page 36), the FREEZE 
operation can also be carried out by pressing the 
FUNCTION

 button at the front of the projector.

• Escaping from the shutter mode is available by 

pressing any button.

• This operation can also be carried out using the 

 command in the MAIN MENU. 

• When FUNCTION BUTTON is set to "SHUTTER" (see 

“FUNCTION BUTTON” on page 36), the SHUTTER 
operation can also be carried out by pressing the 
FUNCTION

 button at the front of the projector.