Panasonic PT-TW231RU User Manual

J

Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter become  

clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup  

and adversely affect the life of the projector. 

If a “Filter warning” icon appears on the screen, replace the air filter unit immediately. Replace it with the 

separately sold ET-RFT100 replacement filter unit. Consult your supplier when you purchase a replacement filter.

J

Clean up the dust on the projector and around  

 

z

the air vents. Press and hold the right-hand  

corner of the filter cover, and then press  

◄ leftwards on the filter cover to release the  

latch and open the filter cover.

Put your fingers on the filter tab and then pull  

 

z

the air filter unit out of the projector.

Insert the new filter unit completely by following  

 

z

the instructions for step 2 in the reverse order.  

Ensure that the area with “TOP” mark is in an  

upward direction.

Insert the air filter unit cover by following the  

 

z

instructions for step 1 in the reverse order. 

J

Be sure to reset the Filter counter after replacing the filter.(

Æ

page 59" 

Filter counter reset") 

Turn off the power before you replace the air filter unit.

 

z

When attaching the air filter unit, make sure that the projector is stable, and work in an environment that is 

 

z

safe, even in the event of the air filter unit dropping.

Do not operate the projector with the air filter unit removed. Dust may accumulate on the optical elements 

 

z

degrading picture quality.

Do not put anything into the air vents. Doing so may result in malfunction of the projector.

 

z

Do not wash the air filter unit with water or any other liquid matter. Otherwise the air filter unit may be damaged.

 

z

 

Latch

Filter cover

Pull out and 

remove.

TOP mark