Panasonic PT-LB51E User Manual

In order to get the best picture quality
 

Draw curtains or blinds over any windows and turn off 
any lights near the screen to prevent outside light or 
light from indoor lamps from shining onto the screen.

Do not touch the surfaces of the lens with your bare 
hands.
 

If the surface of the lens becomes dirty from 
fingerprints or anything else, this will be magnified 
and projected onto the screen.

Liquid crystal panel
 

Do not project the same image for long periods of 
time, as this may remain as an afterimage on the 
liquid crystal panel.

 

The liquid crystal panel of the projector is built with 
very high precision technology to provide fine picture 
details. Occasionally, a few stuck pixels may appear 
on the screen as fixed points of blue, green or red. It 
is recommended to switch off the projector once and 
try after 1hour later again. Please note that this does 
not affect the performance of your LCD.

Screen
 

Do not apply any volatile substances which may 
cause discolouration to the screen, and do not let it 
become dirty or damaged.

The projector has a high pressure mercury lamp and 
that is characterised as follows.
 

The brightness of the lamp depends on the duration 
of use.

 

The lamp may explode or shorten the lamp life by 
shocks or chipping damage.

 

The lamp may explode only occasionally after using 
the projector.

 

The lamp may explode if using the projector after the 
instructed lamp replacement timing.

 

The lamp life is depends on individual lamp 
characteristics, usage condition and the installation 
environment. Especially the consecutive use of the 
projector for more than 10 hours, or the frequent 
switching on or off may greatly affect on the lamp life.

Optical components
 

If you use the projector consecutively 6 hours every 
day, the optical components may need to be replaced 
in less than 1 year.

Make sure the following accessories are provided with your projector.

* 

PT-LB51NTE : 
                  N2QAYB000169 (X1)
PT-LB51E:
                  N2QAYB000172 (X1)

*The illustration above is the remote 
control unit for the PT-LB51NTE.

 (x1)

TXFSX02QHUZ

 for 

 (x2)

 (x1)

[1.8 m (5’ 10”),
K1HA15DA0002 x1]

 (x1)

(TPEP018)

* (x1)

TQBH9009

*PT-LB51NTE only