Panasonic LB20NTU User Manual

B Read the instruction manual for each peripheral device carefully before connecting it.
B Turn off the power supply for all peripheral devices before making any connections.
B If the cables necessary for connection are not included with the peripheral device or

available as an option, you may need to prepare a proper cable for the device concerned.

B If there is a lot of jitter in the video signal, the projected image may flicker. In such cases,

it will be necessary to connect a TBC (time base corrector).

B Refer to the list on page 62 for details on compatible signals which can be input to the

projector.

B Only one audio system circuit is available for the AUDIO IN L-R connectors, so if you

change the audio input source, you will need to remove and insert the appropriate plugs.

RGB signal cable
(accessory)

Computer

Computer

DIN 8-pin
(male)

Computer for

control use

Monitor

RGB signal cable

Serial adapter
(ET-ADSER : sold
separately)

NOTE:
B Do not input the signal to the RGB2 IN/1 OUT connector when “RGB2

SELECT” in the “OPTION” menu is set to “OUTPUT”. (page 46)