Panasonic DW5100UL User Manual

Page of 72
41
Setting the network
The settings required for the network must be
established in order to use the Web browser (page 42)
functions that the PC uses to control the projector.
HOST NAME
: Make alteration if necessary
when to use the DHCP
server.
DHCP
: Set the DHCP item to ON
when to acquire an IP
address automatically using
the DHCP server. 
Set to OFF if DHCP server is
not used.
IP ADDRESS
: Enter the IP address if DHCP
server is not used.
SUBNET MASK
: Enter the subnet mask if
DHCP server is not used.
GATEWAY
: Enter the gateway address if
DHCP server is not used.
NETWORK STATUS: Displays the network status
of the unit such as DHCP or
IP ADDRESS.
STORE
: The settings are stored in the
memory.
NETWORK
HOST NAME
DHCP
IP ADDRESS
SUBNET MASK
GATEWAY
NETWORK STATUS
STORE
MENU SELECT
OFF
192.168.    0.    8
255.255.255.    0
192.168.    0.    1
ADJUST
PROJECTOR
• Before using the DHCP server, make
sure the DHCP server is already
functioning.
• For details of IP address, subnet
mask, and gateway, ask the network
administrator.
Attention
Connecting the PC
System requirements
The following system specifications are required in
order to use the networking functions.
• PC
OS
: Windows XP/2000/Me (Millennium
Edition)/98SE (Second Edition)
CPU
: Pentium 
processor or faster
RAM : 64 MB or more (128 MB or more for
Windows XP/2000)
Web browser: Internet Explorer 6.0 or newer,
Netscape Communicator 7.0 or
newer
• LAN cable
Type : Category 5 compatible straight cable
Length: 100 m (328.1') or less
• If you want to use the E-mail function,
make sure the system can handle E-
mail.
Operation is not guaranteed for all
computers that meet the above
conditions.
Connection example
• Touching the LAN terminal with your
hand (or body) when you are carrying
a static charge may damage the
equipment due to a discharge of static
electricity. Therefore, be careful not to
touch the LAN terminal or metal parts
of the LAN cable.
• Please connect the LAN cable to
indoor devices.
Attention
RGB 2 IN
 VD
SYNC/HD
B/P
B
G/Y
R
R/P
SERIAL
REMOTE 1
REMOTE 2 IN
IN
OUT
LAN
DVI-D IN
RGB 1 IN
VIDEO IN
S-VIDEO  IN
IN
OUT
Personal
computer
Hub
LAN cable
(straight)
LAN cable
(straight)
Projector
10BASE-T or 100BASE-TX
Attention
Returning the network
function setting back to
the factory setting
The user can return all settings of network function
such as IP address, password and E-mail setting to
the factory setting.
Press to 
select 
“STORE”.
Hold down the DEFAULT button for 3
seconds.
A confirmation screen will be displayed.
To cancel, press the MENU button. The
“NETWORK” screen will be displayed.
Press the ENTER button.