Panasonic DW5100UL User Manual

59

• Is the power cord plug correctly plugged in?

• Is the MAIN POWER turned on?

• Is electricity running to the power outlet?

• Is the temperature monitor (TEMP) indicator on the front of the unit flashing or

turned on? (See page 54)

• Is the lamp monitor (LAMP) indicator on the front of the unit flashing or turned on?

(See page 54)

• Is the lamp unit door installed correctly?

• A wrong ID is set. (See pages 15 and 38)

• Is the lens cap still on the lens?

• Is the image input correctly connected?

• Is the input mode set correctly? (See page 24)

• Is the black level adjustment set at the minimum level? (See page 30)

• Is the equipment connected to the projector operating correctly?

• Is the shutter function turned on? (See page 27)

• Is the lens focused properly? (See page 26)

• Is the projection distance correct? (See pages 17 to 20)

• Is the lens dirty?

• Is the projector positioned directly in front of the screen? (See page 16)

• Is the color density and color tone setting correct? (See page 30)

• Is the equipment connected to the projector correctly adjusted?

• Are the batteries exhausted?

• Are the battery polarities set correctly? (See page 14)

• Are there any obstacles between the remote control and the remote control

sensor? (See page 14)

• Are you trying to operate the remote control beyond its operable range? 

(See page 14)

• Are you controlling from external equipment using the REMOTE2 IN terminal? 

(See page 53)

• Is there any external light interfering with remote control operation?

• A wrong ID is set. (See pages 15 and 38)

• Is the on-screen display function at “OFF”? (See page 9)

• Is the input mode properly set? (See page 24)

• Is the correct signal system (SYSTEM SELECTOR) selected? (See page 31)

• Are there any malfunctions on the source side, such as bad video tapes?

• Are you inputting a signal that is not compatible with this projector? (See page 62)

• Is the cable too long?

• Is the video output signal setting of the computer correctly set?

(Read the operating instructions of the your PC.)