Panasonic PT 47WXD64 User Manual

Page of 88
O
PTIONAL
 E
QUIPMENT
 C
ONNECTIONS
9 z
ENGLISH
HDMI (High Definition Multimedia Interface)
input connection
About HDMI
HDMI is the first all digital consumer electronics A/V
interface that supports several uncompressed standard,
enhanced and high definition video format as well as
existing multi-channel audio format. One jack supports both
video and audio information. The HDMI/HDCP
1
 input can
be connected to an EIA/CEA 861
2
compliant consumer
electronic device, such as a set top box or DVD player
equipped with a HDMI or DVI output connection. By
inputting a High-bandwidth Digital Content Protection
(HDCP) high definition picture source to the HDMI terminal
of this PTV, high definition pictures can be displayed on the
screen in their digital form. The HDMI input terminal is not
intended to be used with personal computers. This PTV is
compatible with 1080i, 480p and 480i formats. Select the
output of the connecting to device to match that of the PTV.
Notes:
1. HDMI/HDCP = High Definition Multimedia Interface /
High-Bandwidth Digital Copy Protection.
2. EIA/CEA-861 Profiles compliance covers profiles for
transmission of uncompressed digital video including
high bandwidth digital content protection.
Compatible formats
Connection diagram
Follow the diagram below to connect the PTV to a set top box or a
DVD player. 
Procedure
Connect the HDMI output from the set top box or a DVD
player to the HDMI input on the back of the PTV.
Press TV/VIDEO button on the remote control to select
HDMI input. The connector on the PTV is HDMI Type A
connector.
If the external device has DVI output only, use a DVI to
HDMI adaptor cable*
3
 to connect to the HDMI jack on
the PTV. Also, connect the Audio Out signal from the
external device (set top box or DVD player) to the Audio
In*
4
 jacks below the HDMI input.
If you cannot display the picture because of your Digital
Set Top Box does not have a Digital Out terminal setting,
use the Component Video Input (or the S-Video Input or
Video Input). In this case, the picture will be displayed as
an analog signal.
Notes:
*3. HDMI-DVI conversion cable (TY-SCH03DH) available
on Panasonic Website: www.panasonic.com.
*4. Please refer to pages 22 and 23 for Audio setting detail.
This PTV is compatible with following formats. Please set 
the connecting device to following format.
Video signal 
Audio signal
When digital audio is included in the HDMI connection, 
the compatible sampling frequencies are 48 KHz / 
44.1Khz / 32 Khz.
Format
No of dots
Vertical scanning 
frequency (Hz)
1080i
1920 x 1080i
59.94 / 60
540p (480p)
720 x 480p
640 x 480p
59.94 / 60
59.94 / 60
540p (480i)
720 x 480i
59.94 / 60
S-VIDEO
COMPONENT 
VIDEO INPUT
VIDEO
1
2
INPUT
1
INPUT
2
INPUT
3
PROG
OUT
TO AUDIO 
AMP
L
R
AUDIO
VIDEO
Y
P
B
P
R
TERMINALS ON BACK OF PROJECTION TELEVISION
L
R
ANT B
AUDIO IN
L
R
SERVICE
  ONLY
HDMI
DIGITAL AUDIO OUT
Incoming
Cable
EXTERNAL DIGITAL
    COMPONENT
AV IN
 AUDIO 
OUT
LR
HDMI 
OUT
CABLES NOT SUPPLIED
ANT A
Cable In
CableCARD
INTERFACE
TM
* The connector on the PTV is HDMI Type A connector.