Sony KF-42SX200U User Manual

 

Overview

 

Press to temporarily switch off TV (the standby indicator

 

on the TV set lights 

up in red). Press again to switch on TV from standby mode.

After 15-30 minutes without a signal and without any button being pressed, 

the TV set switches automatically into standby mode.

 

Press this button to switch 

your VCR or DVD on or off.

 

Press this button 

repeatedly until the input of the desired source 
appears on the TV screen.

 

If Media Selector is switched to TV or VCR, press 

this button to select channels.

For double-digit programme numbers, enter the 

second digit within 2.5 seconds.

 

Press this button to watch the last channel 
selected (the last channel watched for at least 5 
seconds).

 

To select a double-digit programme on a Sony 

VCR, e.g. 23, press -/- - first and then the 
buttons 2 and 3.

 

If Media Selector is switched to VCR, press this 

button to record programmes.

 

Press, for a minimum of 3 seconds, to return the 

picture and sound settings to the factory default 
levels. This will also return the set to the install 
condition and the “Auto Tuning” menu will 
appear on the screen. If this is the case refer to the 
section “Switching on the TV set and 
automatically Tuning” (step 4) of this manual.

 

Press this button to 

freeze the picture. Press again to return to the 

normal picture.

 

Press this button 

repeteadly to change the format of the screen (for 

more details, please refer to the section “Changing 

the Screen format”) of this manual.

 

Press to display Multi PIP mode. Press again to 

cancel. For more details, please refer to the section 

“UsingMulti PIP (Picture In Picture)”.

 

Press this button to 

select the number of the next or previous 
broadcast channel.

 

These buttons are also used for 

teletext operation. For more detail please refer to 
the section “Teletext” of this manual.

 

Press this 

button to display the menu on the screen. Press 

again to remove the menu display from the screen.

 

Press this button 

repeatedly to change the picture mode.

 

Press to mute TV sound. 

Press again to restore the sound.

 

Press to switch off PAP, 

Multi PIP, Teletext or video input.

 

Press to switch the time 

display on or off (available only when teletext is 
broadcast).

 

Press 

to display all on-screen indications. Press again to 

cancel.

 

With this remote control you can operate not

only this TV but also the main functions of

your VCR or DVD.

Switch on the device you want to operate and next 

press this button repeatedly to select the VCR, TV 

or  DVD. A green light will be momentarily lit to 

indicate the chosen function.

Before the first time you want to control

 

a DVD or VCR by using this remote

control, you have to set it up depending on the 

brand of the device to be used. For more details, 

refer to chapter “Remote Control Configuration 

for VCR or DVD” on page 33.

 

For more details, please refer to the section 

“Using PAP (Picture And Picture)”.

 

Buttons with green symbols are also used for 

teletext operation. For more details, please 

refer to the section “Teletext” of this manual.

 

For more details, please refer to the section 

“NexTView” of this manual.

 

•When MENU is switched on, use these 

buttons to operate the menu system. For 

details refer to “Introducing and Using 

the Menu System” on page 11.

• When MENU is switched off, press OK to 

show an overview of all TV channels. Then 

press

or

to select the channel and

then press

button to watch the selected 

channel. 

 

Using these buttons you can control

the main functions of your VCR or DVD.

 

These buttons are also used for 

Fastext operation. For more details please refer 
to the “Fastext” chapter in the “Teletext” 
section of this manual.

 

Press this button 

repeatedly to change the sound effect.

 

Press 

this button to adjust the volume 
of the TV.

 

01GBKF50/42SX200U.fm  Page 6  Tuesday, January 7, 2003  10:53 AM