Panasonic DW10000U User Manual
ENGLISH –
113
Information
Before asking for service
… try to check the following points again.
Symptoms
Check point
Page
Power does not turn on
Is the power cord securely plugged in the receptacle?
•
34
Is the MAIN POWER switch put to the “O” position?
•
35, 36
Is power supply live at the receptacle?
•
34
Is the temperature monitor (TEMP) lamp on the projector front
lighting or blinking?
•
107
Is the lamp monitor (LAMP) lamp on the projector front lighting or
blinking?
•
107
Is the lamp unit cover completely attached?
•
111
Was operation of ID setting made in a correctly way?
•
18, 75
Are all four lamp units installed?
•
109, 110
No image appears on screen
Is the lens covered with the cap?
•
25
Is the screen image input connected in a correct manner?
•
43, 54
Is the device(s) connected to the projector working normally?
•
-
Is the shutter function used?
•
43
Screen image is blurred
Is the lens in focus?
•
37
Is the projection distance adequate?
•
21, 22
Is the lens dirty?
•
-
Is the projector placed vertical to the screen?
•
20
Pale color / bad color tint
Are color strength and color tint correctly adjusted?
•
50, 51
Is the device(s) connected to the projector adjusted correctly?
•
-
Remote control does not
function
function
Are dry batteries consumed?
•
-
Is polarity correct in battery setting?
•
17
Are there any obstacle between the remote control and the beam
receiving window?
•
17
Are you trying to operate the remote control beyond the effective
range?
•
17
Is the remote 2 (REMOTE2) terminal used for external control?
•
106
Is any external light interfering with the remote control operation?
•
-
Was operation of ID setting made in a correctly way?
•
18, 75
Is the LOCK button of the remote control at the lock position?
•
11
Is adjustment value protection enabled? Press
▼+ ▼ +
ENTER+
▼ + ▼ + ENTER to cancel the protection.
•
64
Abnormal image on the
screen
screen
Is the input selector set to correct position?
•
43, 54
Is the correct signaling system selected?
•
54
Are there any malfunctions on the source side, such as bad video
tape?
•
-
Are you supplying a signal that is not compatible with the projector?
•
119
Images from PC are not
projected
projected
Is the cable too long?
•
-
Is the correct signal destination set for notebook computer screen
image?
•
-
Use
Fn
and
F3
keys for setting. (For details, refer to the instruction
manual of the computer.)
•
-