Panasonic DW10000U User Manual

■

■

Connection 

terminals (p. 16)

Controls

#

$

%

1

2

&

(

)

*

+

-

.

/

0

#  AC IN terminal ............................................. (p. 34)

Connect the supplied line power cord into this 
receptacle.
Do not connect any other cable to this socket.

$  MAIN POWER switch ......................... (pp. 35, 36)

Use this switch to turn on “I” and off “

○” the 

commercial line power applied to the projector.

% Slot cover .................................................... (p. 28)

Install the input module here.

&  POWER ON ( I ) button ....................... (pp. 34, 35)

When the projector is in standby mode with the 
MAIN POWER switch of the projector at the “ l ” 
side, this button switches the projector to projection 
mode.

(  POWER STANDBY (

When the projector is in projection mode with the 
MAIN POWER switch of the projector at the “ l ” 
side, this button switches the projector to standby 
mode.

) MENU button ....................................... (pp. 46, 48)

Displays and clears the Main Menu. It can also 
return to the previous screen when the menu is 
displayed.
Menus can be displayed by holding down the 
MENU button for at least 3 seconds while the 
on-screen indication function is OFF.

* Arrow 

Use to select an item on the menu screen, change 
setting and adjust the level.
Also use them to enter the “SECURITY” password.

+ LENS button ................................................ (p. 37)

Switches to the adjustment mode for lens focus, 
zoom and shift (position).

- ENTER button ............................................. (p. 48)

Press this button to enter your menu selection or to 
run function.

.  Input select (VIDEO, S-VIDEO, RGB1, RGB2, 

DVI-D, AUX) button ..................................... (p. 43)
Use to change the VIDEO, S-VIDEO, RGB1, 
RGB2, DVI-D and AUX (module input) input ports.

/  AUTO SETUP button .................................. (p. 44)

Pressing this button while projecting an image 
automatically corrects the picture positioning on 
the screen. While the auto setup feature is active, 
a message “EXECUTING...” appears on the 
screen.

0 Self-diagnosis display .................... (pp. 114-115)
1  LIGHT ON/OFF button

This switch is used for illuminating the connection 
terminals and controls.

2 SHUTTER button ........................................ (p. 43)

Press this button to black out the image 
temporarily.

The AUX button to switch the input is disabled when 
an optional input module is not connected.

•