Panasonic DW10000U User Manual
ENGLISH –
25
Getting Started
Example of connecting with VIDEO devices
Attention
When connecting with a video deck, be sure to use the one with a built-in time base corrector (TBC) or use a
TBC between the projector and the video deck.
TBC between the projector and the video deck.
If nonstandard burst signals are connected, the image may be distorted. If this is the case, connect a TBC
between the projector and the video deck.
between the projector and the video deck.
Note
The DVI-D signal input terminal supports only a single link.
The HDMI-DVI-D conversion cable is required to connect an HDMI-compliant device.
The EDID mode setting must be selected so that it corresponds to the device to be connected. (pp. 71, 72)
It is possible to connect the DVI-D input terminal with an HDMI- or DVI-D-compliant device, but with some
devices the images may not appear or other problems may be encountered in operation.
devices the images may not appear or other problems may be encountered in operation.
•
•
•
•
•
•
IN
OUT
RS-232C IN
RS-422 IN
RS-422 OUT
SERIAL
REMOTE 1
REMOTE 2 IN
OUT
IN
SYNC/HD
VD
B/P
B
G/Y
R/P
R
S-VIDEO IN
VIDEO
RGB 2 IN
DVI-D IN
RGB 1 IN
LAN
Video deck (TBC built-in)
Control PC
Control PC
Color monitor
Video deck (TBC built-in)
High-vision video deck
Red (connected to P
R
terminal)
Blue (connected to P
B
terminal)
Green (connected to Y terminal)
DVD player with HDMI
(HDCP) terminal
Control PC
IN
OUT
RS-232C IN
RS-422 IN
RS-422 OUT
SERIAL
REMOTE 1
REMOTE 2 IN
OUT
IN
SYNC/HD
VD
B/P
B
G/Y
R/P
R
S-VIDEO IN
VIDEO
RGB 2 IN
DVI-D IN
RGB 1 IN
LAN
Video deck (TBC built-in)
Control PC
Control PC
Color monitor
Video deck (TBC built-in)
High-vision video deck
Red (connected to P
R
terminal)
Blue (connected to P
B
terminal)
Green (connected to Y terminal)
DVD player with HDMI
(HDCP) terminal
Control PC