Panasonic DW10000U User Manual

ENGLISH –

Basic Operation

Using the SHUTTER
function

If the projector is not used for a certain period of
time during the meeting intermission, for example, a
shutter mode is available that allows the user to hide
images temporarily.

1. Press SHUTTER on the remote

control or the main unit.

The image is turned off.

2. Press SHUTTER again.

The image comes back.

On-screen display
function

This turns the on-screen display function on and off.

1. Press ON SCREEN on the

remote control.

•

Switching the input signal

You can use the remote control to switch the signals
that are being input and projected.

1. Press INPUT SELECT on the

remote control or the main unit.

Press RGB1:
Switches to RGB1 input.

Press RGB2:
Switches to RGB2 input.

Press DVI-D:
Switches to DVI-D input.

Press VIDEO:
Switches to video input.

Press S-VIDEO:
Switches to S-VIDEO input.

Press AUX:
Switches to optional input module input.
(The AUX button to switch the input is
disabled when an optional input module is not
connected.)

Note

Refer to “Connection” for details on the input
terminals. (pp. 25, 26)

Status function

This shows the projector status. It can also be used
to send information about the projector’s status via
e-mail.

1. Press STATUS on the remote

control.

Note

Refer to “How to use network function” for details.
(pp. 84-97)

•

STATUS

INPUT : RGB1
: 0.00kHz/ 0.00Hz
PROJECTOR RUNTIME : 13h
LAMP1 : 9h/OFF/
LAMP2 : 10h/OFF/
LAMP3 : 9h/OFF/
LAMP4 : 9h/ON/
TEMP : IN- 27 / OUT- 32 /OPT- 36
VERSION MAIN : 0.55
VERSION NETWORK : 0.09
REMOTE2 : DISABLE

END STATUS VIA E-MAIL

ENTER

STATUS

END STATUS VIA E-MAIL

ENTER

Basic operations using the remote control

FUNC1

ON
SCREEN

LIGHT

TEST
PATTERN

ASPECT

SHUTTER

INPUT
SELECT

AUTO
SETUP

STATUS