Sony KL-50W1U User Manual
GB
2
GB
WARNING
To prevent fire or shock hazard, do not expose the unit to
rain or moisture.
Dangerously high voltages are present inside the set. Do
not open the cabinet. Refer servicing to qualified
personnel only.
rain or moisture.
Dangerously high voltages are present inside the set. Do
not open the cabinet. Refer servicing to qualified
personnel only.
Safety Information
All TVs operate on extremely high voltages. To prevent
fire or electric shock, please follow the safety procedures
below. For your protection, refer all servicing to qualified
personnel only.
fire or electric shock, please follow the safety procedures
below. For your protection, refer all servicing to qualified
personnel only.
For general safety:
•
Do not expose the TV to rain or moisture.
•
Do not open the rear cover.
For safe operations:
•
Do not operate the TV on any other voltages, but 220–
240 V AC.
240 V AC.
•
Do not operate the TV if any liquid or solid object falls in it
- have it checked immediately.
- have it checked immediately.
•
Do not keep the set plugged in if you are not going to use
it for several days.
it for several days.
•
Do not pull on the power cord to disconnect the TV. Pull it
out by the plug.
out by the plug.
•
Do not place anything on the surface of the front panel
cover when you open it.
cover when you open it.
Important Information
Please read the following information on using and
maintaining the TV, for optimum viewing quality.
maintaining the TV, for optimum viewing quality.
Picture Quality
•
Avoid touching the screen, and take care not to scratch
the surface with hard objects.
the surface with hard objects.
Illumination
To obtain a clear picture, do not expose the screen to
direct illumination or direct sunlight. If possible, use spot
lighting directed down from the ceiling.
direct illumination or direct sunlight. If possible, use spot
lighting directed down from the ceiling.
Installation
•
To prevent over heating of the set, do not block the
ventilation openings.
ventilation openings.
•
Do not install the TV in a hot or humid place, or in a place
subject to direct sunlight, excessive dust or mechanical
vibration.
subject to direct sunlight, excessive dust or mechanical
vibration.
•
After transporting the TV directly from a cold to a warm
location, or if the room temperature has changed
suddenly, pictures may be blurred or show poor colour
over portions of the picture. This is because moisture has
condensed on the mirrors or lenses inside the TV. Let the
moisture evaporate before using the TV.
location, or if the room temperature has changed
suddenly, pictures may be blurred or show poor colour
over portions of the picture. This is because moisture has
condensed on the mirrors or lenses inside the TV. Let the
moisture evaporate before using the TV.
Maintenance
•
Save the original shipping carton and packing material to
use if you ever have to ship your TV. For maximum
protection, repack your TV as it was originally packed at
the factory.
use if you ever have to ship your TV. For maximum
protection, repack your TV as it was originally packed at
the factory.
•
To keep the cabinet looking brand-new, periodically clean
it with a soft cloth. Stubborn stains may be removed with a
cloth slightly dampened with a mild detergent solution.
Never use strong solvents such as thinner or benzene, or
abrasive cleaners since these will damage the cabinet. As
a safety precaution, unplug the TV before cleaning it.
it with a soft cloth. Stubborn stains may be removed with a
cloth slightly dampened with a mild detergent solution.
Never use strong solvents such as thinner or benzene, or
abrasive cleaners since these will damage the cabinet. As
a safety precaution, unplug the TV before cleaning it.
•
To remove dust from the front of the screen, unplug the
TV and wipe gently with a soft cloth lightly dampened with
water or a mild detergent solution, using vertical strokes
only. Then wipe it with a dry, soft cloth. Never use
solvents or thinners for cleaning purposes.
TV and wipe gently with a soft cloth lightly dampened with
water or a mild detergent solution, using vertical strokes
only. Then wipe it with a dry, soft cloth. Never use
solvents or thinners for cleaning purposes.
•
If the picture turns dark after the TV has been in use for a
long period of time, it may be necessary to clean the
inside of the TV. Consult qualified service personnel for
this.
long period of time, it may be necessary to clean the
inside of the TV. Consult qualified service personnel for
this.
NOTICE FOR CUSTOMERS IN THE UNITED
KINGDAM
KINGDAM
A moulded plug complying with BS1363 is fitted to this
equipment for your safety and convenience.
Should the fuse in the plug supplied need to be replaced,
a 5 AMP fuse approved by ASTA or BSI to BS 1362 (i.e.
marked with
equipment for your safety and convenience.
Should the fuse in the plug supplied need to be replaced,
a 5 AMP fuse approved by ASTA or BSI to BS 1362 (i.e.
marked with
or must be used.
When an alternative type of plug is used it should be fitted
with a 5 AMP FUSE, otherwise the circuit should be
protected by a 5 AMP FUSE at the distribution board.
If the plug supplied with this equipment has a detachable
fuse cover, be sure to attach the fuse cover after you
change the fuse. Never use the plug without the fuse
cover. If you should lose the fuse cover, please contact
your nearest Sony service sation.
with a 5 AMP FUSE, otherwise the circuit should be
protected by a 5 AMP FUSE at the distribution board.
If the plug supplied with this equipment has a detachable
fuse cover, be sure to attach the fuse cover after you
change the fuse. Never use the plug without the fuse
cover. If you should lose the fuse cover, please contact
your nearest Sony service sation.
•
IMPORTANT
If the plug supplied is not suitable for the socket outlets in
your home, it should be cut off and an appropriate plug
fitted in accordance with the following instructions:
your home, it should be cut off and an appropriate plug
fitted in accordance with the following instructions:
The wires in this mains lead are coloured in accordance
with the following code:
with the following code:
Blue
Neutral
Brown
Live
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured blue must be connected to the
terminal which is marked with the letter N or coloured
black. The wire which is coloured brown must be
connected to the terminal which is marked with the letter L
or coloured red. Do not connect either wire to the earth
terminal in the plug which is marked by the letter E or by the
safety earth symbol Y or coloured green or green and yellow.
apparatus may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured blue must be connected to the
terminal which is marked with the letter N or coloured
black. The wire which is coloured brown must be
connected to the terminal which is marked with the letter L
or coloured red. Do not connect either wire to the earth
terminal in the plug which is marked by the letter E or by the
safety earth symbol Y or coloured green or green and yellow.
•
WARNING
To prevent shock hazard, do not insert the plug cut off
from the mains lead into a socket outlet. This plug cannot
be used and should be destroyed.
from the mains lead into a socket outlet. This plug cannot
be used and should be destroyed.
•
To prevent fire or shock hazard, do not expose the unit to
rain or mositure.
rain or mositure.
•
Dangerously high voltages are present inside the set. Do
not open the cabinet. Refer servicing to qualified personnel only.
How to replace the fuse Open the fuse compartment
with a blade screwdriver, and replace the fuse.
not open the cabinet. Refer servicing to qualified personnel only.
How to replace the fuse Open the fuse compartment
with a blade screwdriver, and replace the fuse.
FUSE