Sony KDS-R70XBR2 User Manual

To display clear crisp pictures, you must connect your TV correctly and 
select the correct Wide Mode to display the picture in the correct aspect 
ratio (see “Changing the Wide Screen Mode” on page 31). It is strongly 
recommended that you connect the antenna/cable input using 75-ohm 
coaxial cable to receive optimum picture quality signal. A 300-ohm twin 
lead cable can be easily affected by radio noise and the like, resulting in 
signal deterioration. If you use a 300-ohm twin lead cable, keep it as far 
away from the TV as possible. Do not use an indoor antenna, which is 
especially susceptible to radio noise. 
You can also connect a variety of optional equipment to your TV (see page 
17). For multiple equipment connections, please refer to the separate Quick 
Setup Guide.

❑

Your cable company scrambles some channels, such as premium 
channels. Viewing all channels requires a cable box.

❑

You do not intend to hook up any other audio or video equipment to 
your TV. 

✍

Press ANT to switch between VHF/UHF and cable.

Antenna cable

CATV cable

z

To change channels 
using the cable box, set 
your TV to channel 3 or 
4 depending on the 
cable box channel 
output. 

✍

To set up the TV remote control, see “Programming the Remote 
Control” on page 32. 

✍

Press SAT/CABLE to begin operating the cable box with the remote 
control (see page 28). The indicator will light up.

✍

Press ANT to switch between VHF/UHF and cable.

IN

OUT

CATV cable

Rear of TV

Cable box

Coaxial 
cable

Antenna 
cable