Sony KP-51PS2 User Manual

No picture (screen is dark), no sound.

Poor or no picture (screen is dark),
but good sound.

Poor picture quality when watching a 
RGB video source.

Good picture, no sound

No colour on colour programmes

Distorted picture when changing 
programmes or selecting teletext

Wrong characters appear when viewing 
teletext.

Striped picture

Noisy picture when viewing TV channel

Remote control does not function

The standby indicator 

 on the set 

flashes.

Additional Information

 Here are some simple solutions to the problems which may affect the picture and sound.

• Plug the set in.
• Press the

 

 

button on the front of the set.

• If the 

 indicator is on in red colour, press TV 

 button on the remote

 control.
• Check the aerial connection.
• Turn the set off for 3 or 4 seconds and then turn it on again using the

 

 

  button on the front of the set.

• Using the MENU system, select the “Picture Adjustment” menu. Adjust
  the brightness, contrast and colour balance levels.

• Press the 

 button repeatedly on the remote control until the RGB 

symbol 

 1 is displayed on the screen.

• Press the 

 +/- button on the remote control.

• Check that "Main" speaker is selected in the "Features" menu.

• Using the MENU system, select the Picture Adjustment menu. Adjust the
 colour 

balance.

• Turn off any equipment connected to the Scart connectors on the rear of

the set.

• Using the menu system, enter to the “Language/Country menu and select
  the country in which you operate the TV set.

• Adjust the RF Atenuator (ATT). For details, please refer to the section

"Using the Further Programme Preset function".

• Adjust Fine Tuning (AFT) to obtain better picture reception. For details,  

please refer to the section "Using the Further Programme Preset function"

• Replace the batteries.

• Contact your nearest Sony service centre.