Sony KF-50WE620 Manual

KF-42/50WE620

2-108-981-13(1)

Use this hookup if:

❑

Your cable TV company scrambles some channels, but not all of them 
(pay channels vs. regular cable channels) and you need to use a cable 
box.

❑

You want to enjoy the Twin View feature.

With this setup you can:

❑

Use the LCD projection TV remote control to change channels on your 
cable box when the signal is scrambled. To program your Sony remote 
control to operate your cable box, see “Programming the Remote 
Control” on page 77.

❑

Use the LCD projection TV’s remote control to change channels on 
your LCD projection TV when the signal is not scrambled. Your LCD 
projection TV’s tuner provides a better signal than the cable box.

❑

Use the Twin View feature. (When all channels are routed through your 
cable box, only one signal is sent to the LCD projection TV, so you 
cannot use the Twin View feature.)

Connect the coaxial cable from your cable service to the LCD projection 
TV’s VHF/UHF jack.

Using a coaxial cable, connect the LCD projection TV’s TO 
CONVERTER jack to the cable box’s IN jack. The LCD projection 
TV’s internal converter allows you to switch between unscrambled 
signals coming straight into the LCD projection TV and scrambled 
signals coming in through the cable box, eliminating the need for an 
external splitter.

Using a coaxial cable, connect the cable box’s OUT jack to the VCR’s 
IN jack.

Using A/V and S VIDEO cables, connect the VCR’s AUDIO/VIDEO 
and S VIDEO OUT jacks to the LCD projection TV’s AUDIO/VIDEO 
and S VIDEO IN jacks.

Using a coaxial cable, connect the VCR’s OUT jack to the LCD 
projection TV’s AUX jack.

✍

To view scrambled channels, set your LCD projection TV to AUX 2 - 6 
(depending on your cable box output). Change channels using your 
cable box.