Sony KP-57WS500 User Manual

Page of 172
Introducing the Sony Projection TV
9
Model name1[KP-51WS500] Model name2[KP-57WS500] Model name3[KP-65WS500]
[4-088-847-11 (1)]
In
tr
od
uci
n
g t
h
Son
y
 P
roj
e
c
tion 
TV
Wide Screen Mode: Allows you to watch 4:3 normal broadcasts in 
wide screen mode (16:9 aspect ratio).
Auto Wide: Allows you to select the wide screen mode automatically.
Flash Focus
: Allows you to adjust convergence automatically.
Digital Visual Interface (DVI): Can accommodate a copyprotected 
digital connection (HDCP
*
) to other devices (such as digital set-top 
boxes) that have compatible interfaces. The DVI-HDTV input terminal 
is compliant with the EIA-861 standard and is not intended for use with 
personal computers. 
Using this manual
We recommend that you carefully review the contents of the following three 
sections in the order shown to ensure that you fully understand the operation 
of your new projection TV.
1
Installing and Connecting the Projection TV
This section guides you through your initial setup. It shows you how to 
install your projection TV, to connect your new components and to connect 
the antenna and cable.
2
Using the Features
This section shows you how to begin using your new projection TV. It also 
shows you how to use your remote control functions.
3
Using the menus
This section teaches you how to access on-screen menus and adjust your 
projection TV settings.
Instructions in this manual are written for the remote control. Similar 
controls are also found on the projection TV console.
* High-bandwidth Digital Content Protection 
01COV.book  Page 9  Tuesday, April 2, 2002  12:22 PM