Sony KP 53V85 User Manual

– 41 –

3. The SCREEN displays the item being adjusted.

4. Press 

1 or 4 on the Remote Commander to select the

adjustment item.

5. Press 

3 or 6 on the Remote Commander to change the data.

6. Press 

2 or 5 on the Remote Commander to select the

category.

Every time you press 2(Category up), Service mode changes

in the order as shown below.

1. After adjustment, remove the plug from AC outlet, and then

replace the plug in AC outlet again.

2. Turn the power switch ON and set to Service Mode.

3. Call the adjusted items again and confirm they were adjusted.

By using Remote Commander (RM-Y905),all circuit adjustments

can be made.

1. Pattern Generator (with component outputs)

2. Frequency counter

3. Digital multimeter

4. Audio oscillator

1. Standby mode. (Power off)

2. DISPLAY  n   5   n   VOL (+)   n   TV POWER

on the Remote Commander.

(Press each button within a second.)

Note : When the PJE mode is activated, which displays an

internally generated signal, several buttons on the remote

commander will have different functions than listed

above. Therefore, when in the PJE mode, refer to page 46

for button functions.

VPNT

VPNV

VPNS

PJE

3DCM

TONE

DSP

MC

SC

IC

PP

DAC

PI

ID

CCD

OP

7. If you want to recover the latest values press 

- then  [ENTER]  to

read the memory.

8. Press 

[MUTING] then  [ENTER]  to write into memory.

9. Turn power off.

Note: Press 

8 then [ENTER] on the Remote Commander to initialize

or turn set off and on to exit.

MUTING

TV POWER ON

RM-Y905

Category up

Data up

Data down

Category down

DISPLAY

Adjustment item up

Adjustment item down

ENTER

VOL (+)

Category   Adjustment item

DATA

(SCREEN DISPLAY)

SERVICE VPNT VPOS 031
000000   00