Sony KP-51DS2U User Manual

 

Safety Information

 

Do not open the cabinet and the rear cover of 
the TV. Refer to qualified service personnel 
only.

To prevent fire or shock hazard, do not expose 
the TV to rain or moisture.

For your own safety, do not touch any part 
of the TV, power lead or aerial lead during 
lightning storms. 

Do not cover the ventilation openings of the 
TV For ventilation, leave a space of at least 
10cm all around the set.

Never place the TV in hot, humid or 
excessively dusty places. Do not install the 
TV where it may be exposed to mechanical 
vibrations.

To prevent fire, keep inflammable objects or 
naked lights (eg candles) away from the TV.

Clean the TV with a soft, lightly dampened 

cloth. Do not use benzine, thinner or any 

other chemicals to clean the TV. Do not 

scratch the TV screen. As a safety precaution, 

unplug the TV before cleaning it.

Pull out the power lead by the plug. Do not 
pull on the power lead itself.

Take care not to place heavy objects on the 
power lead as this could result in damage.
We recommend you wind any excess lead 
around the holders provided on the rear of the 
TV.

Place the TV on a secure stable stand. Do not 
allow children to climb on to it. Do not place 
the TV on its side or face up.

Do not cover the ventilation openings of the 
TV with items such as curtains or newspapers 
etc.

Never push objects of any kind into the set as 

this could result in a fire or electric shock. 

Never spill liquid of any kind on the set. If 

any liquid or solid object does fall into the 

cabinet, do not operate the TV. Have it 

checked immediately by qualified personnel.

For environmental and safety reasons, it is 
recommended that the TV set is not left in 
standby mode when not in use. Disconnect 
from the mains.

This set is to operate on a 220-240V AC supply 

only. Take care not to connect too many 

appliances to the same power socket as this 

could result in fire or electric shock.

Unplug the power lead before moving the TV. 
Avoid uneven surfaces, quick steps or 
excessive force. If the set has been dropped or 
damaged, have it checked immediately by 
qualified service personnel.

 

•After transporting the projection TV directly from a cold to a 

warm location, or if the room temperature has changed

 

suddenly, pictures may be blurred or show poor colour over 

portions of the picture. This is because moisture has 
condensed on the mirrors or lenses inside the projection TV. 
Let the moisture evaporate before using the projection TV.

•To obtain a clear picture, do not expose the screen to direct 

illumination or direct sunlight. If possible, use spot 

lighting directed down from the ceiling.

• Displaying a still picture for long periods of time, for instance, 

when operating a video game or personal computer and viewing 
aprogramme in 16:9 mode, may damage the picture tube. To 
avoid this, keep the picture contrast level low.

• Clean the projection TV screen and cabinet with a soft dampened 

cloth. Do not use any abrasive cleaners. As a safety 
precaution, unplug the set before cleaning it.

• Avoid touching the screen, and take care not to scratch the 

surface with hard objects.