Sony KDF-E55A20 Manual
Watching the TV
44
KDF-E55/60A20
2-593-962-11(3)
Programming the Remote Control
The remote control is preset to operate Sony brand video equipment.
Follow the steps below to program your TV’s remote control to operate the
other video equipment.
other video equipment.
Find the three-digit code for your equipment from the “Manufacturer’s
Codes” listed on page 45. If more than one code number is listed, try
entering from the code listed first.
Codes” listed on page 45. If more than one code number is listed, try
entering from the code listed first.
1
Press and hold the
,
or
FUNCTION
button you want to
program on the remote control and press the
button simultaneously.
The selected
FUNCTION
button (DVR, DVD/VCR or SAT/CABLE)
will flash.
2
Enter the three-digit manufacturer’s code number using the - – 9
buttons while the button is lit. If code is not entered within 10 seconds,
you must perform the step 1 again.
buttons while the button is lit. If code is not entered within 10 seconds,
you must perform the step 1 again.
3
Press
button.
When programmed correctly, the selected
FUNCTION
button will flash
twice, and when not, it flashes five times.
To check if the code works
Aim your TV’s remote control at the equipment, and press the green
button. If the equipment turns on and off, the programming is completed. If
not, try the next code listed.
not, try the next code listed.
Sony Equipment
Programmable Code Number
DVR
772
DVD/VCR
601 (Sony Dream System)
SAT/Cable
801 (Sony Satellite Receiver)
✍
If no code is input within the above specified time, or an invalid or
incorrect code number is input, the remote control automatically goes
back to the previous setting.
incorrect code number is input, the remote control automatically goes
back to the previous setting.
✍
In some cases, you may not be able to program your remote control to
operate other equipment. In such cases, use the equipment’s own
remote control.
operate other equipment. In such cases, use the equipment’s own
remote control.
✍
Removing the batteries or using dead batteries may cause the
programmed codes to be lost and revert back to the factory setting.
Reprogramming the codes may be necessary.
programmed codes to be lost and revert back to the factory setting.
Reprogramming the codes may be necessary.
ENT
RETURN
TOOLS
TV/VIDEO
TV
MUTING
DVD/
VCR
SAT/
CABLE
DVR
POWER
TV POWER
JUMP
ANT
MTS/SAP
FREEZE
SOUND
PICTURE
TV/SAT
SUR
WIDE
WEGA
VISUAL SEARCH
CH
VOL
REC
REC PAUSE
REC STOP
TOP MENU MENU
F1
F2
POWER SAVING
G
UIDE
DISP
LA
Y
REPLAY
GATE
ADVANCE
PLAY
PAUSE
PREV
NEXT
STOP
TV
1
1
3
2
DVR
POWER