Sony KDP-65W5550 User Manual
2
Note on Caption Vision
This television receiver provides display of television closed
captioning in accordance with §15.119 of the FCC rules.
captioning in accordance with §15.119 of the FCC rules.
Note on Convergence Adjustment
Before you use your projection TV, make sure to adjust
convergence. For details, see “Adjusting the Convergence
Automatically (Flash Focus)” on page 42.
convergence. For details, see “Adjusting the Convergence
Automatically (Flash Focus)” on page 42.
Use of this television receiver for other than private viewing of
programs broadcast on UHF or VHF or transmitted by cable
companies for the use of the general public may require
authorization from the broadcaster/cable company and/or
program owner.
programs broadcast on UHF or VHF or transmitted by cable
companies for the use of the general public may require
authorization from the broadcaster/cable company and/or
program owner.
NOTIFICATION
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference with radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference with radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
❑
Reorient or relocate the receiving antenna.
❑
Increase the separation between the equipment and receiver.
❑
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
from that to which the receiver is connected.
❑
Consult the dealer or an experienced radio/TV technician for
help.
help.
Safety
❑
Operate the projection TV only on 120 V AC.
❑
The plug is designed, for safety purposes, to fit into the wall
outlet only one way. If you are unable to insert the plug fully
into the outlet, contact your dealer.
outlet only one way. If you are unable to insert the plug fully
into the outlet, contact your dealer.
❑
If any liquid or solid object should fall inside the cabinet,
unplug the projection TV immediately and have it checked
by qualified service personnel before operating it further.
unplug the projection TV immediately and have it checked
by qualified service personnel before operating it further.
❑
If you will not be using the projection TV for several days,
disconnect the power by pulling the plug itself. Never pull on
the cord.
disconnect the power by pulling the plug itself. Never pull on
the cord.
❑
For details concerning safety precautions, see “Important
Safety Instructions” on page 3.
Safety Instructions” on page 3.
Installing
❑
To prevent internal heat buildup, do not block the ventilation
openings.
openings.
❑
Do not install the projection TV in a hot or humid place, or in
a place subject to excessive dust or mechanical vibration.
a place subject to excessive dust or mechanical vibration.
❑
Avoid operating the projection TV at temperatures below 5°C
(41°F).
(41°F).
❑
If the projection TV is transported directly from a cold to a
warm location, or if the room temperature changes suddenly,
the picture may be blurred or show poor color due to
moisture condensation. In this case, please wait a few hours
to let the moisture evaporate before turning on the projection
TV.
warm location, or if the room temperature changes suddenly,
the picture may be blurred or show poor color due to
moisture condensation. In this case, please wait a few hours
to let the moisture evaporate before turning on the projection
TV.
❑
To obtain the best picture, do not expose the screen to direct
illumination or direct sunlight. It is recommended to use spot
lighting directed down from the ceiling or to cover the
windows that face the screen with opaque drapery. It is
desirable to install the projection TV in a room where the
floor and walls are not of a reflective material.
illumination or direct sunlight. It is recommended to use spot
lighting directed down from the ceiling or to cover the
windows that face the screen with opaque drapery. It is
desirable to install the projection TV in a room where the
floor and walls are not of a reflective material.
Trademark Information
TruSurround and the
symbol are trademarks of SRS Labs,
Inc. TruSurround technology is incorporated under license from
SRS Labs, Inc.
SRS Labs, Inc.
BBE and BBE Symbol are trademarks of BBE Sound, Inc. and are
licensed by BBE Sound, Inc. under U.S. Patent No. 4,638,258 and
4,482,866.
licensed by BBE Sound, Inc. under U.S. Patent No. 4,638,258 and
4,482,866.
Steady Sound, Digital Reality Creation, Caption Vision,
CineMotion, Memory Stick, and Twin View are registered
trademarks of Sony Corporation. ClearEdge VM, HD Detailer, and
Uniform Brightness Screen are trademarks of Sony Corporation.
i.LINK is a trademark of Sony Corporation and used only to
designate that a product contains an IEEE 1394 connector. All
products with an i.LINK connector may not communicate with
each other.
CineMotion, Memory Stick, and Twin View are registered
trademarks of Sony Corporation. ClearEdge VM, HD Detailer, and
Uniform Brightness Screen are trademarks of Sony Corporation.
i.LINK is a trademark of Sony Corporation and used only to
designate that a product contains an IEEE 1394 connector. All
products with an i.LINK connector may not communicate with
each other.
For Safety
Be careful when moving the projection TV
When you place the projection TV in
position, be careful not to drop it on your
foot or fingers.
position, be careful not to drop it on your
foot or fingers.
Watch your footing while installing the
projection TV.
projection TV.
Carry the projection TV in the specified manner
If you carry the projection TV in a manner other than the specified
manner and without the specified number of persons, it may drop
and a serious injury may be caused. Be sure to follow the
instructions mentioned below.
manner and without the specified number of persons, it may drop
and a serious injury may be caused. Be sure to follow the
instructions mentioned below.
❑
Carry the projection TV with the specified number of persons
(see “Carrying Your Projection TV” on page 12).
(see “Carrying Your Projection TV” on page 12).
❑
Do not carry the projection TV holding the speaker grill.
❑
Hold the projection TV tightly when carrying it.
The projection TV includes handles that you can use to carry the
unit (KDP-65WS550 only).
unit (KDP-65WS550 only).
You are cautioned that any changes or modifications not
expressly approved in this manual could void your authority to
operate this equipment.
expressly approved in this manual could void your authority to
operate this equipment.
As an E
NERGY
S
TAR
Partner,
Sony has determined that this
product meets the E
product meets the E
NERGY
S
TAR
guidelines for energy efficiency.
®
®
E
NERGY
S
TAR
is a U.S. registered mark.
®
AX1 PJ.book Page 2 Wednesday, April 30, 2003 2:13 PM