EIKI EIP-25 User Manual

                                               

14

1)  Press “Power” button to turn off the projector lamp. 
2)  When you press the “Power ” button, you will see the message stating “Press 

Power again to turn off the lamp!”. At this time, you only have to press 
“Power” button again to turn off the projector. Or else the message will 
disappear automatically after 5 sec. 

3)  After the lamp is turned off, LED indicator will blink rapidly. At this time, 

“Power” will have no function. To restart the projector, please wait 60 sec, 
when LED indicator blinks slowly and steadily, you can restart the projector. 

4)  After turning off the main switch on the top of power cord socket of the 

projector, then disconnect the power cable.   

 

 

To extend the lamp life-span, please do not unplug the power cord 

immediately after the lamp is turned off. Please allow at least 120 sec for 
the fan to stop, and then you can unplug the power cord.

 

 
To adjust the tilt angle of the projector 

 

To raise the projector 
1.  Press and hold the Adjustor-foot release button. 
2.  Raise the projector to the height you want, then release the button to lock the 

foot into position. 

Adjustor-foot release button

 

Adjustor-foot