Barco RHDM-1701 User Manual
38 ______________________________________________ Barco - RHDM-1701 - Maintenance Manual
Removal and reinstallation of electronic boards
Reinstallation of the communication board
Execute all actions described above in reverse order.
Take the following points into account:
•
Execute all actions described above in reverse order.
Take the following points into account:
•
When placing the communication board in the back cover, verify that the
metal housing of the USB ports is nicely fitting in the holes (n°3 in the figure
above).
7.13
Removal and reinstallation of the control box
Figure 20: Control box
Figure 21: Location of screws, cables to remove or install the control box
1
2
3
2
3
Torx (4x T10) that fix the control box to the front cover
Control panel removed from the front cover
Cable gap in front cover for control panel cables
Control panel removed from the front cover
Cable gap in front cover for control panel cables
1
1
1
1
1
3
2