EIKI EIP-5000 User Manual
89
DHCP Client Setting
Connect the LAN cable before turning the pro-
jector on. If not, the DHCP Client function does
not work.
jector on. If not, the DHCP Client function does
not work.
Menu operation
Example: “Options (2)” screen menu
Description of DHCP Client
Note
• Select “ON” for “DHCP Client”. “Obtaining IP
Address...” appears, then the message “The
network settings have been changed.”, IP Address,
Subnet Mask and Gateway will be displayed.
network settings have been changed.”, IP Address,
Subnet Mask and Gateway will be displayed.
• If the DHCP server is not available, “Could not
obtain IP Address.” appears.
In this case, set the TCP/IP manually. (See
“TCP/IP Setting” at right.)
In this case, set the TCP/IP manually. (See
“TCP/IP Setting” at right.)
TCP/IP Setting
Set the TCP/IP manually.
Menu operation
Example: “Options (2)” screen menu
1
Select “TCP/IP”, then press
.
2
Enter “IP Address” using '
'
'
'
', "
"
"
"
", |
|
|
|
|
and \, then press
.
3
Enter “Subnet Mask” using '
'
'
'
', "
"
"
"
",
|
|
|
|
| and \, then press
.
Description
Obtains configuration parameters for
TCP/IP network automatically.
Sets the TCP/IP manually.
TCP/IP network automatically.
Sets the TCP/IP manually.
Selectable items
ON
OFF