Motorola CDMA-EVDO REV A User Manual
6 - 2
MC75 User Guide
•
Debit Card Reader - snaps onto the bottom of the MC75 to allow easy data capture with the swipe of a
magnetic stripe card and personal identification number (PIN) entry using a numeric keypad.
magnetic stripe card and personal identification number (PIN) entry using a numeric keypad.
•
Snap-on Mobile Payment Module with Chip and PIN - snaps onto the bottom of the MC75 to allow easy data
capture with magnetic stripe cards, EMV compliant Chip and PIN cards and personal identification number
(PIN) entry using a numeric keypad.
capture with magnetic stripe cards, EMV compliant Chip and PIN cards and personal identification number
(PIN) entry using a numeric keypad.
Single Slot USB/Serial Cradle
This section describes how to use a Single Slot USB/Serial cradle with the MC75. For USB communication setup
procedures refer to the MC75 Integrator Guide.
procedures refer to the MC75 Integrator Guide.
The Single Slot USB/Serial Cradle:
•
Provides 5.4 VDC power for operating the MC75.
•
Synchronizes information between the MC75 and a host computer. Refer to the MC75 Integrator Guide for
information on setting up a partnership between the MC75 and a host computer.
information on setting up a partnership between the MC75 and a host computer.
•
Charges the MC75’s battery.
•
Charges a spare battery.
Charging the MC75 Battery
Connect the cradle to power. Insert the MC75 into the slot to begin charging.
Figure 6-1
MC75 Battery Charging
Charging/Battery Status
LED
LED