Motorola CDMA-EVDO REV A User Manual

Page of 214
6 - 16 MC75 User Guide
Display Messages
The follow messages may appear on the DCR display:
ENTER PIN - A PIN is required to complete the transaction.
PIN ERR - The entered PIN is not between 4 and 12 characters.
CANCELED - The transaction was cancelled by the user.
COMPLETE - The transaction was completed.
KEYCLEAR - The DCR was tampered with or the battery completely discharged. The DCR must have the key 
re-injected. See your system administrator.
BATT OK - Battery is significantly charged.
BATT LOW - Battery charge is low. Re-charge as soon as possible.
STAND BY - DCR is performing a firmware check. This occurs if it has been powered off for more than 24 hours.
Check the DCR Battery Level
When the DCR is not used for extended periods of time or in storage it must be charged periodically to maintain the 
battery charge. Motorola recommends charging the DCR once every three months.
If the DCR battery fully discharges the debit function will be inoperable but the MSR will still function for credit card 
transactions. Return the DCR for service.
To check the battery level:
1.
Remove the DCR from the MC75.
2.
Press and hold the 
5
 key until the battery status displays on the DCR display.
BATT OK - Battery is significantly charged
Table 6-4    
Keypad Key Descriptions
Key
Description
Numeric
Used to enter PIN.
Cancel
Cancels the current transaction.
Clear
Clears the entered data.
Enter
Submits the entered data.
NOTE
While the DCR is being used in normal operation (application is accessing the DCR port), the DCR charges 
from the MC75.