Kathrein UFS 712si User Manual

52

Select the “Parental control” menu using the menu button 

, the 

 buttons on the main menu 

and 

. You are now prompted to enter the PIN code (factory default setting: 0000). After entering the 

PIN using the keypad you are shown the following display:

Select the parameters to be changed using the 

 buttons. 

Use the 

 buttons (On/Off) to select whether the main menu should be blocked. If the menu is 

blocked, changes can be made only by entering the four-digit PIN code.

Use the 

 buttons (On/Off) to select whether the receiver should be blocked. If the receiver is 

blocked, it can be operated only by entering the four-digit PIN code after it is switched on (factory 
setting: 0000).

Also pay attention to the bars 
at the bottom of the on-screen 
display! This provides hints on 
what to do next.

Press the 

 button to exit the menu again.