Fujitsu Siemens Computers Loox T User Manual
Troubleshooting and tips
The Pocket PC does not respond any more
Cause
Troubleshooting
An application program has caused
the fault.
the fault.
►
or
►
►
If the restart does not work, reset the Pocket PC to
the factory settings (see "Cold starting and resetting
factory default settings").
the factory settings (see "Cold starting and resetting
factory default settings").
The battery is dead.
►
Connect the power adapter to the Pocket PC to
charge the battery.
charge the battery.
or
►
►
Connect the power adapter to the cradle and insert
the Pocket PC in the cradle to charge the battery.
the Pocket PC in the cradle to charge the battery.
The battery is charging. The power-on indicator flashes
orange.
orange.
The battery discharges too quickly
Cause
Troubleshooting
The battery is either too hot or too
cold.
cold.
►
Bring the Pocket PC up / down to a normal
temperature again.
temperature again.
If the operating time of the battery mode is extremely
short, the battery is probably old and should be replaced.
Please contact your dealer for a new battery.
short, the battery is probably old and should be replaced.
Please contact your dealer for a new battery.
The End button does not respond properly
Cause
Troubleshooting
You have pressed the End key for too
long to switch the Pocket PC on or
off.
long to switch the Pocket PC on or
off.
►
Briefly press the End key until the Pocket PC
switches on or off.
switches on or off.
A26391-K182-Z120-1-7619, edition 1
91