Kathrein UFS 822si User Manual

Page of 156
127
CONNECTING UP THE VIDEO/PVR
For details of how to connect your external recorder to the receiver refer to the connection diagram 
provided at the end of this manual and the instructions for the external recorder.
For VCR recording, the satellite receiver must be switched on or the timers must be pre-programmed 
and the receiver be on the channel to be recorded. During the recording the remote control must not be 
operated, since all displays would be included on the recording.
You must fi rst set the Scart socket of the UFS 822 to “VCR mode” by pressing the 
 button while the 
receiver is in operation in order for your TV set to automatically play back the picture from the external 
recorder.
In this setting, the picture from the external recorder is switched through to the TV set during playback. 
Pressing the 
 button again restores priority to the signal from the UFS 822.
Note: 
The system ensures that the same video and audio signal is present at the TV and 
VCR Scart sockets. The signal output format ah the TV Scart socket may however 
differ from that at the VCR Scart socket. The setting of the format output from the TV 
Scart socket can be set in the menu (“System Setup”, “TV Settings”, “AV Settings” 
“Video output” or in the First Installation). The format “FBAS” is output as standard 
at the VCR Scart socket. 
VIDEO/PVR RECORDER RECORDING
VIDEO/PVR RECORDER PLAYBACK